Best Large Wall Clocks Hands Kit

More on TIKROUND Youngtown High Torque Long Shaft Clock Movement Mechanism with 12...

• Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm).
• Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel.
• Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length.
• DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.
• Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.

More on 2Pcs Quartz Clock Mechanism Kit, Wall Clock Mechanisms Mattery Powered...

• Two-Clock Mechanisms Size: Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mm thickness clock panel. Long Total sharft length 23 mm (0.9 in),thread length 15.4 mm (0.6 in),suitable for 9 - 13 mm thickness clock panel, These two clock movements can be used for almost any home wall clock.
• Silent Clock Mechanism: YOGINGO clock movement use ultra-silent Scanning Design, Sweep clock movement without any noise which can offer your sleep a silent environment. All of your requirements are met by a simple and elegant design.
• Material&Package: The clock hands are made of high-quality aluminum, which is lightweight and resistant to corrosion. Includes 2 clock movements in different sizes, 5 pairs of hours and minutes hands, 5 seconds hands and second cap, easy to install, and many options in one set.
• Wide Application: DIY quartz wall clock replacement movement parts, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, suitable for repairing, replacing, or making a clock, and also suitable for various styles of the clock frame (no battery)
• Warm Notice: Please double-check the dimensions of this clock mechanism replacement movement before purchasing; they are made of aluminum, and please do not apply excessive pressure to avoid bending them.

More on TIKROUND Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair...

• Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands (10 mm to 450 mm).
• Movement size: Total shaft length is 23 mm (29/32 inch),thread length is 12 mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel.
• Center of hole hand size: hour hand is approx. 187 mm (7.4 inch); Minute hand is approx. 260 mm (10.2 inch); Second caps is approx. 7 mm (0.28 inch).
• DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.
• Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.

More on Digital Wall Clock Large Display, 16.2 Inch , LED Digital Clock with Remote...

• 【16.2 Inch Large LED Display】The digital clock has a 16.2 inch large screen display, 4 inch high contrast clear jumbo digits make it much easier to read even from a distance and from all angles. Here are all the features that you might expect for a digital wall clock: Time, Date, Week, and Temperature. ATTENTION: Must be plugged in to work. Not battery operated.
• 【10 Levels Automatic Brightness Dimmer】With 10-level adjustable brightness display, you can easily adjust to a comfortable brightness manually by using the remote control. The LED clock has a built-in automatic dimming sensor, which can also automatically adjust the brightness as the light changes, smart to provide you with the needs.
• 【Memory Function】There is a built-in memory function, even if the power is disconnected, the time data will not be lost, no need to reset. Additionally, you can set two separate alarms if you have a different time schedule. And this large wall clock has a count-up or count-down function (up to 99 minutes and 99 seconds).
• 【Remote Control】All the settings and operations of the big wall clock do not need to be removed, but can be easily done with the remote control. Note: If you don't find the remote control and USB cable, be sure to open the other end of the box to check it.
• 【Beautiful and Functional】This wall clocks is suitable for living room, kitchen, garage, farmhouse, office, warehouse, classroom, gym, shop, nursery. And it is also the best gift for friends, partner and the elderly. Attention: There is no plug, please connect with the USB port or ONLY 5V/1A and 5V/2A adapter. Adapter is needed to keep the clock working. The battery power only works for storing the clock setting in the case of main power outage.

More on AILILIFE 3D Clock Hands, DIY Large Clock Movement Mechanism with 12 Inch Long...

• Size: Hour Hand: 31cm (12 1/4" ); Minute Hand: 39cm (15 3/8 "); Clock Dial: 10.4cm (4 3/4"); Material: Alumnium
• Unique Design - 3D clock hands fit clock dial over 25" diameter, easy and simple design with mute scanning movement, Introducing from high-technology which maximum reducing power consumption and effectively extending the life of the movement.No harm to the environment and health.
• Enjoy the DIY - 3D clock hands has an open design with just minute and hour hands.You can design your clock and room according to your habits, or share your design process with friends and family.
• Silence Movement - Silent sweeping, mute movement 3d clock hands will give you a quiet night.
• Main Function - Applicable to cross-stitch, three-dimensional embroidery, craft clock;suitable for quartz clock repairing, replacing or making a clock£¬Large clock hands also can be used as a wall decoration.
• Our Service: We believe you will love this 3D clock hands, If there is any problems, please feel free to contact us. Our friendly customer service will be always with you whenever you need our technical support.

More on 14 Styles Non Ticking Wall Clock Movements Mechanism, Clock Hands Made of...

• ✔️Good Choose for You DIY or Repair: the package comes with 14 different pairs of hands (10 black and 4 gold)in various forms,Spades, Fancy, Straight,Wrench, Star, Knife,Fork, good for repairing, replacing or making a clock by yourself. The style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.
• ✔️Accurate time-keeping:the 14 kinds of serpentine clock hands are suitable for clocks between 10 and 14 inches in length; Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; equipped with sweeping motion, no ticking;giving you a quiet space.
• ✔️Fourteen of most popular clock hands: These serpentine clock hand is made of aluminum, with fine resistant corrosion and light weight.Different Sizes,Colors and Styles. Meet different needs only in one package,perfect for your clock creations; get to pick out the style and length of the hands that look best with your clock at no additional charge.The Diameter of Clock Panel can be 10 and 14 inches.
• ✔️Stylish design: the long spindle hands are in special shapes, such as wrench, star, knife and fork, which can making a surprising decorative effect with their cute and lovely look.
• ✔️ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc.

More on High Torque Clock Replacement Movement,Clock Movement Metal Clock Needle...

• 🍓🍓Applicable Scope: It is very suitable for DIY quartz wall clock replacement movement, etc. It is also suitable for cross stitch, three-dimensional embroidery, craft clock, frameless clock.
• 🍓🍓Movement Size: Shaft length is 31 mm (1-1/ 5 inch); Thread length is 24 mm (24/ 25 inch); Jump second movement, suitable for about 20 mm (4/ 5 inch) thickness clock panel.
• 🍓🍓Material: The hour and minute hands are made of aluminum, which is wear-resistant, rust-proof, corrosion-resistant, durable and long-lasting.
• 🍓🍓Hands length: total hour hand length: about 75 mm (3.0 inches); Total minute hand length: about 104 mm (4.1 inches); Total second hand length: about 136 mm (5.3 inches).
• 🍓🍓Carkio is focused on providing high quality products and first class service at a reasonable price. A three-month warranty is provided to you. If you are not satisfied with our products,please feel free to contact us and we will resend or refund.

More on SGACAI 1PCS Silent Large Wall Clock Quartz Clock Movement Mechanism Hands...

Description 100% brand new and high quality Color: black + gold Movement type: quartz Size: Movement 5.5*5.5*3.5cm, clock 7cm, minute 9.3cm, second 12cm Features: DIY clock movement: suitable for repairing, replacing damaged parts of the clock or as high-quality handmade materials for making clocks yourself Wide range of applications: simple clock movement can match clock panels of various colors, patterns and shapes New high-quality material, very durable The product contains: 1* movement

More on Long Large Torque Wall Clock Movement Mechanism Metal Clock Hand Kits DIY

Features： *Simple and stylish design. *Great for repairing, replacing or making a clock of your design. *Axle Length: total shaft length 31mm, thread height 24mm, suitable for wall clock with panel of about 20mm *Crystal Frequency: 32.768KHz *Accuracy: ±30 sec/month at 1.5V DC 25℃ (unadjusted) *Current Consumption: Less than 190μA at 1.5V DC *Working Voltage: 1.3V to 1.7V *Operating Temperature: -10℃ to 50℃ *Power Supply: 1.5V Package included: 1 set x Clock Movements Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.

More on ROZYARD DIY Silent Large Wall Quartz Clock Movement Mechanism Hands Repair...

brand new and high quality Features: Suitable for repairing, replacing or making a clock. High torque clock mechanism, suitable for 5mm thickness clock panel. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability. Equipped with a sweeping motion, no ticking. Suitable for repairing, replacing the broken parts of a clock, or serving as good handwork material to make a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel. Specifications: Material: Plastic and Metal Host Size: approx.56x56x16mm/2.20x2.20x0.63in Total Shaft Length: 17mm/0.67in Thread Length: 8.7mm/0.34in Suitable for 5mm thickness clock panel. Hour hand size: approx. 175mm Minute hand size: approx. 230mm Color: As pictures shown Quantity: 1 Set Note: Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Content: 1 Set x Quartz Clock Movement Repair Tools(other accessories demo in the picture is not included.)

More on Wall Clock Hand Set Watch Hands Only Quartz Large DIY Parts Repair Kit Bulk...

Description If you love DIY projects, if you want DIY a wall clock , the you could not miss our wall clock hands set. The sleek look and dependable performance of this wall clock movement will add of modernity and functionality to your home or office space. Features - Color: White -Material:Plastic - Size: 14.00X0.70X0.60cm/5.50X0.28X0.24in - The wall clock replacement clock hands are made of plastic materials, ensuring that it will last for years to come. - Clock hands features a beautiful and minimalist design that will enhance any home or office decor. - These clock hands include hour, minute, and second, offering a complete package for your wall clock needs. - The wall clock hands are small and compact, suitable for use in any space, whether it’s a hallway, living room, or office. - Our replacement clock hands are simple and stylish, with reasonable length design, suitable for diy clock or clock repair.

More on Wall Clock Hand Set 10 Sets DIY Replacement Hands Only Large Repair Kit Plastic

Description Looking for a practical gift for a friend or family member? This wall clock hands set is the perfect choice! You could them to DIY making a wall clock and then send it to your lover. The durability of the plastic construction ensures that this wall clock hands will provide years of reliable service. Features -Color:As Shown -Material:Plastic -Size:13.50X0.70X0.70cm/5.31X0.28X0.28in - This clock hand set is suitable for use with most wall clock frames and features a simple installation process. - The clock hand is lightweight and easy to install, simple to create a beautiful and functional home decor. - The clock hand could work with most wall clock frames, which is a perfect addition to your home or office decor. - Suitable for wall clock diy repair. Nice spare part to upgrade your clock, and make it look more attractive. - The clock hand kit is made of plastic material, and durable, good workmanship, so you can use it more at ease.

More on Timelike 3D Clock Hands, Large Clock Needles Quartz Movement, Wall Clock...

• SIZE - Hour hand length: 31.5cm / 12.6inch ; minute hand length: 39cm / 15.6inch ; clock dial: 12cm / 4.8inch .
• MATERIAL - This clock hands and case are made of metal. Powered by one AA battery (not included).
• SIMPLE DESIGN - Cool clock has an open design with just minute and hour hands.
• INSTALL - The clock dial has a hole, which is easy to hang it on the wall with screw.
• TEST - Our products have been well tested, examined and packaged before sending off, but we cannot 100% guarantee the items remain undamaged when delivered to you. Any problem please feel free to contact us first so that we can supply the best service for you.

More on 15 Sets Clocks Hands Kits Large Repair Movement Plastic Work

Description Do you want a kind of professional replacement pointer for your clock? Do you want to bring new look to your DIY clock? This can be your best choice. Really practical and useful, just install it onto your clock. Features -Color:As Shown -Material:Plastic -Size:13.50X0.70X0.60cm/5.31X0.28X0.24in - Perfect replacement clock hand for various clock DIY projects and creative projects. - Versatile set with different clock hand options to create your own clock. - Crafted from plastic material, good texture, durable, these clock hands will be a good choice for your clock accessories. - Easy installation, you can replace the old clock hands to bring different appearance to your clock easily. - Great craftsmanship, delicate shape, good texture, beautiful look, fashionable and unique.

More on 6pairs Hands Quartz Clock Movement Mechanism, EEEkit Battery Operated High...

EEEkit 6 pair hands quartz clock movement mechanism is a nice DIY clock repair set. These replacement parts suit well different styles of clock frames, which are good for repairing, replacing, or making a clock by yourself. There are more functions waiting for you to find out. Also, the suitable size is for your easy use and storage. The long shaft clock mechanism will give you great accuracy and dependability, along with the sweeping motion. Wall quartz clock movement is without ticking noise and will provide you with a quiet environment, you can use it with confidence and convenience. These clock repair replacement tools work well for cross-stitch, three-dimensional embroidery, craft clock, and frameless draw clock, and can be applied as DIY quartz wall clock replacement movement parts. Warm Notice: There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent

More on Clock Hands Clocks Clock Making Kit Wall Clock Large Clock Mechanism...

Description This clock mechanism kit has a good manufacturing process and have long service life. Easy to use, easy to DIY install. This DIY clock Kit with different style clock hands, making you create your own DIY craft clock, minimalist wall clock as a gift, frameless theme clock, and family photo wall clock, etc. Features -Material: Metal, plastic. -Size: About 31.00X1.50X0.50cm/12.18X0.59X0.20in. - Made of metal and plastic, safe and durable, lightweight, can be applied for a long time. - Clock mechanism kit, perfect for clock replacement, repairing all kinds of clocks. - These clock mechanism kits can bring interest to people, improve their hands-on ability and concentration. - Features high precision and high torque clock mechanism, which ensures accuracy and dependability. - Simple with the minute and hour hands, easy to go with other decoration, just let your imagination run wild.

More on Long Large Torque Wall Clock Movement Mechanism Metal Quartz Clock Hand Kits Diy

Features： *Simple and stylish design. *Great for repairing, replacing or making a clock of your design. *Axle Length: total shaft length 31mm, thread height 24mm, suitable for wall clock with panel of about 20mm *Crystal Frequency: 32.768KHz *Accuracy: ±30 sec/month at 1.5V DC 25℃ (unadjusted) *Current Consumption: Less than 190μA at 1.5V DC *Working Voltage: 1.3V to 1.7V *Operating Temperature: -10℃ to 50℃ *Power Supply: 1.5V Package included: 1 set x Clock Movements Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.

More on Long Large Torque Wall Clock Movement Mechanism Metal Clock Hand Kits DIY

Features： *Simple and stylish design. *Great for repairing, replacing or making a clock of your design. *Axle Length: total shaft length 31mm, thread height 24mm, suitable for wall clock with panel of about 20mm *Crystal Frequency: 32.768KHz *Accuracy: ±30 sec/month at 1.5V DC 25℃ (unadjusted) *Current Consumption: Less than 190μA at 1.5V DC *Working Voltage: 1.3V to 1.7V *Operating Temperature: -10℃ to 50℃ *Power Supply: 1.5V Package included: 1 set x Clock Movements Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.